How To Install Multi Cartridge Stainless Steel Filter Housing？

Guangzhou Lvyuan Water Purification Equipment Co.,Ltd can provide various of stainless steel filter housing for options. 

The multi cartridge filter housing is made of stainless steel 304 or stainless steel 316L, they can be custom by different water flow rate per hour. From 3 pieces of cartridges to 120 pieces of cartridges or more. The multi cartridge housing body can be replaced by different filter cartridges, e.g.: PP melt blown filter cartridges, string wound filters, titanium filter cartridges, pleated water filters, sea water filter cartridges, stainless filters and so on. The filter cartridges length from 10 inch to 60 inch. This stainless steel housing is SS304 material, it is required by our Thailand customer, 20 inch with 48 pieces 5 microns PP melt blown filter cartridges, it can be handle up to 45000L per hour water filtration flow, maximum working pressure is designed by 15 bar.The PP filter cartridges are sealed with stainless steel spring pressure caps, the inside of housing with the stainless steel positioning rod, to ensure that the filter cartridges without any shaking during in the impact of water. 

This housing is not only handle high water flow rate, the most special design is its manual rocker arm,the rotating rocker arm is good for the maintain and convinient replacement, when the people need to open or close it, they no need to take down or bring up the filter housing cap on the ground, the operation staffs just need to unscrew the rocker arm, they can open or close it effortlessly. And the housing upper head is locked by a high strength stainless steel eye bolts, to make the housings easy open and close, the real meaning of using the stainless steel eye bolts connection is to have a good sealing effect, it can be very effective to prevent the SS filter housing water leaking. Email us to know more about product information: [email protected]